User Tools

Site Tools


signalk_client

This is an old revision of the document!


The signalk_client command must be run from a console.

pi@raspberrypi:~ $ signalk_client -h usage /usr/local/bin/signalk_client [host] -i -c -h [NAME]... -i print info about each value type -c continuous watch -h show this message

You can run with no arguments to retrieve all available values.

To receive only the voltage: pi@raspberrypi:~ $ signalk_client servo.voltage

To continuously receive the imu heading: pi@raspberrypi:~ $ signalk_client -c imu.heading

signalk_client.1535593684.txt.gz · Last modified: 2018/08/30 01:48 by 73.128.99.196