User Tools

Site Tools


calibration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
calibration [2019/02/08 05:03]
seandepagnier
calibration [2019/07/25 13:55]
seandepagnier
Line 52: Line 52:
  
 If metal objects are moved around the sensors, the compass must recalibrate. If metal objects are moved around the sensors, the compass must recalibrate.
 +
 +
 +
 +3) Rudder Feedback
 +
 +If you have a rudder feedback sensor, with analog input to the motor controller, it must be calibrated.
 +
 +The rudder range should first be set to the maximum angle the autopilot is allowed to move the rudder. ​   The angle is needed to provide accurate rudder feedback measurements. For example the opencpn dashboard display.
 +
 +Next, manually turn the rudder for, centered, starboard range, port range and press the button each time.
  
calibration.txt ยท Last modified: 2019/07/25 13:55 by seandepagnier