pypilot

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

The recommended way to upgrade is to write a stable disk image to the sd card.  If you want to get the latest changes, or upgrade without reimaging, see [[upgrading from git]]

Before upgrading with a new disk image, it is advised to backup the pypilot.conf file, and copy it back again.   If you are upgrading through a package manager this is not an issue.

All of the pypilot settings are stored in a small text file pypilot.conf.  This file is in json format and can be edited with a text editor.

  - tinypilot - located in /home/tc/.pypilot/pypilot.conf
  - openplotter - located in /home/pi/.pypilot/pypilot.conf

Copy this file somewhere before overwriting the disk image, and copy it back afterwards.

If you do not, it will be a fresh pypilot without [[calibration]] and you will need to recalibrate and adjust all of the settings again.

For upgrading microprocessors see [[upgrading arduino sketches]]

pypilot

User Tools

Site Tools

Page Tools